Tie Dye Nails: Sharpie Design on Acrylic Nail Art Tutorial with Kirsty

To make tie dye nails, you draw random patches of sharpie colour onto a sealed white nail, then spray gel residue remover over the top so the colours flow into each other. Touching tiny drops of the same solution onto the nail pushes the colour outwards and leaves pale patches, like snakeskin.

Kirsty Meakin from Naio Nails shows how to do a tie dye sharpie design on a white acrylic almond nail. This sharpie nail art tutorial covers the full acrylic application as well, and although it looks like a lot of work, it is quick and simple to do.

At a Glance

  • Design: bright, bleeding watercolour patches with reptile-style mottling and a little bling
  • Artist: Kirsty Meakin
  • Technique: marker pen colour dissolved with solvent over a gloss-sealed acrylic nail
  • Nail shape: almond
  • Key products: Mega White Acrylic Powder, Naio Nails Mega Gloss, Gel Residue Remover, AB Crystals, sharpie pens
  • Video length: about 9 and a half minutes

Why You'll Love These Tie Dye Nails

  • A really quick and easy design that looks complex.
  • The white base makes the sharpie colours pop.
  • A snakeskin effect appears as the colours bleed.
  • Finished with a few stones for bling.

Products Used in This Video

How to Create Tie Dye Nails

1. Build the white almond nail

On a prepped nail with a sculpting form fitted, apply white acrylic for a full white almond nail. Bleed the white out so it is really, super white, and build the free edge a little longer. White is used because it makes the sharpies pop.

Building the full white acrylic almond nail.

2. Cap with clear and pinch

Check the side walls and add a tiny, thin layer of clear acrylic. Once it has set a little, test with a gentle pressure, then pop the pinching tool on to pinch the product in. Pinch down the sides with your fingers and towards the end.

3. File and buff

Check how set it is, then file the side walls first. Because it is a full colour, keep the back neat with a nice even line around the cuticle. Do the surface, keeping the apex, as you should not get file happy. Buff smooth, dust off and wipe with acetone.

4. Seal

Apply a thin layer of mega gloss sealer gel over the entire nail and cure in the lamp for two minutes.

The sealed white nail, ready for the sharpie design.

5. Add the sharpie colour

Randomly draw sections of colour with the sharpies.

Drawing random sharpie colour sections.

Building up the sharpie colour sections.

6. Spray to create tie dye

Spray the gel residue remover onto the colour. Watch it flow and move into each other, which gives the tie dye effect.

The sharpie colours blending into a tie dye pattern.

7. Touch to create snakeskin

Using the solution in a dappen dish, touch randomly over the nail. It forces the colour outwards, and the white underneath gives lighter patches for a snakeskin effect. Use only a tiny bit of liquid, or it will disperse over the entire nail. Let it dry.

The finished tie dye snakeskin effect.

8. Add stones and seal

Apply a few stones with a little glue for bling, then seal the design and stones with mega gloss sealer gel, sweeping up the side and round the edge to cap it. Cure for two minutes.

9. Finish with oil

Pop some cuticle oil on to finish.

Pro Tips

  • Use white underneath so the sharpie colours pop.
  • Do not touch with too much liquid or the colour disperses everywhere.
  • Keep the structure of the nail perfect even under a design.
  • Every time the file touches the nail it should serve a purpose.

Common Mistakes

  • Using too much liquid for the snakeskin step, so the colour spreads too far.
  • Over-filing the surface of the nail.

Who Is This Design For?

Anyone who wants a colourful, eye-catching design that is quick and easy to do, with a snakeskin nail effect as a bonus.

Ways to Make It Your Own

  • Choose your own sharpie colours.
  • Leave it sprayed without the touching step.
  • Add more or fewer stones.

Aftercare

Use cuticle oil regularly to keep the skin around the nails comfortable.

Frequently Asked Questions

How do you make tie dye nails?

Build and seal a white nail, draw random sharpie colour over it, spray gel residue remover so the colours bleed together, touch on tiny drops for a snakeskin effect, let it dry, then add stones and seal with gloss gel.

Why use a white base?

It makes the sharpie colours really pop and gives the lighter patches.

How do I get the tie dye effect?

Spray the gel residue remover over the sharpie colours and watch them flow together.

Can I skip the touching step?

Yes. Kirsty says you could leave it sprayed, but touching adds something extra.

Why is the nail sealed before the sharpie goes on?

The gloss gel is cured for two minutes first, so the colour sits on a smooth, sealed surface and can flow when it is sprayed.

How is the finished design protected?

It is sealed with gloss gel over the colour and stones, capped round the edge and cured for two minutes.

Give Tie Dye Nails a Try

Watch the video above and try this quick, colourful design.

Susiję straipsniai